Home>Products>USB Bus Analyzer
USB Ver.2.0 Bus Protocol Analyzer SB-2020TOP
 |
|
The SB-2020 is a USB bus analyzer that conforms
to USB 2.0 and is much smaller than the SB-1010 that conforms to USB
1.1 but it inherits its user friendliness. You can use this analyzer in every field as this satisfies the test environment criteria required by measuring device manufacturers. The SB-2020 is used in combination with the SB-2020 main unit and a Windows® PC. |
 |
Automatic detection of USB 2.0 at high, full, and low speed |
| The SB-2020 supports development and verification of low-speed devices as well as the latest high-speed ones. | |
|
|
|
Trigger function |
| You can set a target packet as a trigger. Because the SB-2020 can start or stop logging using the trigger as a start point, development and verification focused on the target device is possible. | |
|
|
|
Powerful filtering function |
| The target device operation can easily be checked using a real-time filter. It is needless to say that captured log data can be filtered offline as well. | |
|
|
|
Built-in 512 MB capture memory |
| This allows for sufficient handling of high-speed data. Combed with the trigger function and pre-trigger, the SB-2020 achieves problem detection at an earlier stage. | |
|
|
|
Capturing of log data up to 20 GB |
| The SB-2020 transfers log data to the PC as it is captured. Long logging sessions facilitate observation of data that is less frequently generated. | |
|
|
|
Display descriptor tree |
| Protocol analysis is readily conducted without needing to understand difficult specification sheets. Moreover, even when the USB device class information is not in the acquired log data, translations can be displayed if the class is specified. |
|
|
|
|
Bus state display |
| You can display and record insertion and removal of USB devices. | |
|
|
|
Display communication speed |
| The communication speed for each transaction can be determined at a glance. |
|
||
