Vertical deflection system

Input

Analog 4 channels + CAN bus trigger

Sensitivity (bandwidth and accuracy)

2mV/div (DC to 100MHz, -3.5dB, ±2%)
5mV/div to 10V/div (DC to 100MHz, -3dB, ±2%)

Triggering

Triggering mode

Edge, Event, TV, CAN

Signal source

CH1, CH2, CH3, CH4, LINE, CAN bus

Horizontal deflection system

Time base range

5ns/div to 50s/div

Acquisition function

Resolution

8 bits

Max. sampling rate

400MS/s (2ch), 200MS/s (4ch)

CAN bus Communication Specification

Communication speed

33.3 kbps/50.0 kbps/83.3 kbps/95.2 kbps/100 kbps/125 kbps/250 kbps/500 kbps/1 Mbps

Sampling point

Variable

Communication ID format

Standard format (11 bits)/extended format (29 bits)

CAN bus trigger functions

Reception trigger

Reception trigger function in which trigger is synchronized with all CAN frames

ID trigger

ID trigger function in which four IDs can be specified

Data trigger

Data trigger function in which trigger is synchronized with data frames containing specified ID and data
• Any 1-byte data can be set with one ID and in increments of one byte.
• Any data length between 1 and 8 bytes can be specified in increments of one byte.
• Data can be specified in increments of one bit using the mask function.

Bit transition trigger

Bit transition trigger function in which trigger is synchronized with specified bit-condition transition of data containing specified ID
• One ID and any 1-bit data can be set.
• Any data length between 1 and 8 bytes can be specified in increments of one byte.
• Transition of the specified bit can be specified (0 to 1 and vice versa).

Error trigger

Error trigger function in which trigger is synchronized with any stuff, CRC, or form error.
• This function can be ORed with another trigger.

Trigger delay

There is a delay of about 30ms between reception of a CAN frame (completion of EOF) and the occurrence of the trigger.

Other CAN bus functions

Data display function

In the single mode, the ID and data are displayed after a waveform is obtained.
Data in the center of the screen is displayed in hexadecimal format at the bottom of the screen.

Other

Power supply

100 to 240 V AC, 50/60 Hz

Dimensions

215mm x 170mm x 167mm (excluding protruding parts)