Isolation Systems DM-8000 and DM-8000H - IWATSU TEST INSTRUMENTS CORPORATION

Catalog

Home>Products>Isolation Systems DM-8000 and DM-8000H>Performance

Isolation Systems DM-8000 and DM-8000H　Performance

Main Unit DM-8000 and DM-8000H

※When the acquisition control card (DM-610) is mounted.

Item		DM-8000	DM-8000H
Transceiver card connection
	Number of slots	6 slots (enabling connection of up to 12 isolation units)
Time axis
	Sweep range	1 ns/div to 20 s/div
	Clock accuracy	10ppm max
	Acquisition modes	Normal or Peak
Trigger system
	Mode	Auto, Normal, Single, Stop
	Sources	Up to 24 channels and an external trigger(EXT)
	Type	Edge or pulse width
	Trigger delay	Available
Interface
	Ethernet ports	Three 10BASE-T/100BASE-T ports	Three 1000BASE-T ports
Power supply unit
	AC power supply	100 V to 240 V (50/60 Hz)
Mechanical unit
	Dimensions and weight	351 (W) x 132 (H) x 420 (L) (mm), 6.9 kg ± 10%
	Operating temperature	0 to +40°C
	Performance guaranteed temperature	10 to +35°C
Accessories
	LAN cable	1
	Power supply cable	1
	Operating manual	CD-R (x1)

Isolation unit DM-9xx and DM-9xxL

Item

DM-900, DM-900L

DM-910, DM-910L

Signal input block

Frequency Bandwidth
(-3 dB)

500 MHz

Bandwidth limiter

20 MHz, 100 MHz

Input impedance

1MΩ // 16pF

Maximum input voltage

400 Vmax (DC + AC peak <= 5 kHz) CAT I

Number of channels

2 (channels are not isolated)

Input coupling

GND/ DC 1MΩ, AC 1MΩ

GND/ DC1MΩ

Input sensitivity

2 mV/div to 10 V/div, 1-2-5 steps

CH1-MAIN:	50 mV/div to 5 V/div, 1-2-5 steps
CH2-ZOOM	2 mV/div to 1 V/div, 1-2-5 steps

Offset range

2 mV/div to 50 mV/div: ± 1 V

100mV/div to 500mV/div : ±10V

1V/div to 10V/div : ±100V

CH1-MAIN:

50mV/div to 500mV/div:±10V

1V/div to 5V/div:±100V

CH2-ZOOM

2mV/div to 20mV/div:±2V

50mV/div to 1V/div:±20V

DC gain accuracy

+/- (1.5% + 0.5% of ful-scale)

Offset accuracy

Calculated by +/- (1.0% + 0.5% of full-scale　+ 1mV) at 10mV/div

Probe sense

10:1, 100:1, 1000:1 (Auto detection/manual settings)

Sample rate

1 GS/s (2 GS/s during interleave)

Vertical axis resolution

8 bits

Maximum memory length

DM-900:500k points per channel

DM-900L:16M points per channel

DM-910:500k points per channel

DM-910L:16M points per channel

Trigger system unit

Trigger sources

CH1, CH2

CH1-MAIN

Trigger slope

Positive / Negative

Coupling

AC, DC, HFREJ, LFREJ

Level range

125% of full scale

Interface

Optical interface

One interface with 3 cables (optical fiber cable length: 2 to 200 m)

Power supply and battery unit

Internal battery

3 battery packs (unit can operate on one battery)

Battery charging

Can be charged by the main unit

Battery charger

Option

Output capacitance

285Wh

Battery operation time

Approx. 12 hours of continuous operation (when using 3 batteries)

Battery charging time

Approx. 6 hours

AC power supply

100 V to 240 V (50/60 Hz)

Calibration signal

0.6 V/6 V (switchable)

Mechanical unit

Dimensions (mm)

122.4 (W) x 258.4 (H) x 544 (L)

Weight

7 kg ± 10% (excluding battery packs and accessories)
Battery pack weight: 660 g ± 10% per pack

Operating temperature

0 to +40°C

Performance guaranteed temperature

+10 to +35°C

Accessories

Battery pack

Power supply cable

Transceiver card DM-600

	Optical interface	2 interfaces (enabling connection of up to 2 isolation units)
	Operation indicator	Status display via LED
	Interface	Optical interface (2 interfaces with 3 optical fiber cables each)
	Mechanism	Card inserted in main unit (DM-8000)
	Operating temperature	0 to +40°C
	Performance guaranteed temperature	+10 to +35°C

IS Viewer DM-800

	※IS Viewer is installed in the controlling computer (option) and is used to operate the isolation system and monitor waveforms.
	Operations	+, -, ×, ÷, \|×\|, \|÷\|, ∫
	Parameter measurements	Max, Min, p-p, Top, Base, Top-Base, RMS, CycleRMS, Mean, CycleMean, +/-Overshoot, TransitionTime, dv/dt, Freq, Period, +/-PulseCount, +/-PulseWidh, Duty, Integral, Integral(abs), Skew(%), Skew(Level)
	Other features	Cursor, smoothing, channel deskewing, rescaling, offline viewer
	Saving waveforms	CSV
	Saving images	BMP, PNG, Clipboard
	Saving setup values	With waveforms and without waveforms
	Controlling computer
	CPU	Intel® Pentium®4 Processor or later
	RAM	2 GB or larger
	OS	Windows® XP Professional SP2 / SP3
	Display	At least WXGA (1280 x 768 pixels) recommended (SXGA (1280 x 1024 pixels) is required for full display.)

Note 1.	Intel and Pentium are registered trademarks or trademarks of Intel Corporation and its subsidiary companies in the United States of America and other countries.
Note 2.	Windows is a registered trademark or trademark of Microsoft Corporation in the United States of America and other countries.

Top of this page

Isolation Systems DM-8000 and DM-8000H Performance

Main Unit DM-8000 and DM-8000H

Isolation unit DM-9xx and DM-9xxL

Transceiver card DM-600

IS Viewer DM-800

Isolation Systems DM-8000 and DM-8000H　Performance